あなたの人生に残念と後悔を残しないように、私たちはできるだけ人生を変えるあらゆるチャンスをつかむ必要があります。あなたはそれをやったことができましたか。JPexamのMicrosoftの070-642試験トレーニング資料は成功したいIT職員のために作成されたのです。あなたがMicrosoftの070-642認定試験に合格することを助けます。成功と擦れ違うことを避けるように速く行動しましょう。
JPexamの070-642問題集というものをきっと聞いたことがあるでしょう。でも、利用したことがありますか。「JPexamの070-642問題集は本当に良い教材です。おかげで試験に合格しました。」という声がよく聞こえています。JPexamは問題集を利用したことがある多くの人々からいろいろな好評を得ました。それはJPexamはたしかに受験生の皆さんを大量な時間を節約させ、順調に試験に合格させることができますから。
あなたはJPexamが提供したMicrosoftの070-642認定試験の問題集だけ利用して合格することが問題になりません。ほかの人を超えて業界の中で最大の昇進の機会を得ます。もしあなたはJPexamの商品がショッピング車に入れて24のインターネットオンライン顧客サービスを提供いたします。問題があったら気軽にお問いください、
070-642認定試験について、あなたはどうやって思っているのですか。非常に人気があるMicrosoftの認定試験の一つとして、この試験も大切です。しかし、試験の準備をよりよくできるために試験参考書を探しているときに、優秀な参考資料を見つけるのはたいへん難しいことがわかります。では、どうしたらいいでしょうか。大丈夫ですよ。JPexamはあなたの望みを察して、受験生の皆さんの要望にこたえるために、一番良い試験070-642問題集を提供してあげます。
試験番号：070-642問題集
試験科目：TS: Windows Server 2008 Network Infrastructure, Configuring Certification
最近更新時間：2014-01-27
問題と解答：全400問
100％の返金保証。1年間の無料アップデート。
あなたはインターネットでMicrosoftの070-642認証試験の練習問題と解答の試用版を無料でダウンロードしてください。そうしたらあなたはJPexamが用意した問題集にもっと自信があります。早くJPexamの問題集を君の手に入れましょう。
JPexamは優れたIT情報のソースを提供するサイトです。JPexamで、あなたの試験のためのテクニックと勉強資料を見つけることができます。JPexamのMicrosoftの070-642試験トレーニング資料は豊富な知識と経験を持っているIT専門家に研究された成果で、正確度がとても高いです。JPexamに会ったら、最高のトレーニング資料を見つけました。JPexamのMicrosoftの070-642試験トレーニング資料を持っていたら、試験に対する充分の準備がありますから、安心に利用したください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/070-642_exam.html
NO.1 You need to capture the HTTP traffic to and from a server every day between 09:00 and 10:00.
What should you do?
A. Create a scheduled task that runs the Netsh tool.
B. Create a scheduled task that runs the Nmcap tool.
C. From Network Monitor, configure the General options.
D. From Network Monitor, configure the Capture options.
Answer: B
Microsoft 070-642 070-642認定資格
NO.2 Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.
You need to ensure that the server can communicate with all segments on the IPv6 network.
What should you do?
A. Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B. Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C. Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D. Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
Answer: A
Microsoft問題集 070-642認証試験 070-642認定証 070-642
NO.3 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Routing and Remote Access service (RRAS) role service installed. You need to view all inbound VPN
packets. The solution must minimize the amount of data collected.
What should you do?
A. From RRAS, create an inbound packet filter.
B. From Network Monitor, create a capture filter.
C. From the Registry Editor, configure file tracing for RRAS.
D. At the command prompt, run netsh.exe ras set tracing rasauth enabled.
Answer: B
Microsoft 070-642認定試験 070-642認定試験 070-642 070-642認定証
NO.4 You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21. The server
is configured to use IPv6 addressing.
You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt?
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Answer: C
Microsoft認定資格 070-642 070-642 070-642
NO.5 Your network contains a DHCP server named DHCP1 that runs Windows Server 2008 R2. All client
computers on the network obtain their network configurations from DHCP1. You have a client computer
named Client1 that runs Windows 7 Enterprise. You need to configure Client1 to use a different DNS
server than the other client computers on the network. What should you do?
A. Configure the scope options.
B. Create a reservation.
C. Create a DHCP filter.
D. Define a user class.
Answer: B
Microsoft過去問 070-642認定資格 070-642練習問題 070-642問題集
NO.6 Your network contains 100 servers that run Windows Server 2008 R2. A server named Server1 is
deployed on the network. Server1 will be used to collect events from the Security event logs of the other
servers on the network.
You need to define the Custom Event Delivery Optimization settings on Server1.
Which tool should you use?
A. Event Viewer
B. Task Scheduler
C. Wecutil
D. Wevtutil
Answer: C
Microsoft認定試験 070-642認定証 070-642参考書 070-642 070-642認定証
NO.7 Your network contains a server that runs Windows Server 2008 R2. You plan to create a custom script.
You need to ensure that each time the script runs, an entry is added to the Application event log.
Which tool should you use.?
A. Eventcreate
B. Eventvwr
C. Wecutil
D. Wevtutil
Answer: A
Microsoft参考書 070-642練習問題 070-642
NO.8 Your network contains a domain controller named DC1 and a member server named Server1.
You save a copy of the Active Directory Web Services (ADWS) event log on DC1. You copy the log to
Server1.
You open the event log file on Server1 and discover that the event description information is unavailable.
You need to ensure that the event log file displays the same information when the file is open on Server1
and on DC1.
What should you do on Server1?
A. Import a custom view.
B. Copy the SYSVOL folder from DC1.
C. Copy the LocaleMetaData folder from DC1.
D. Create a custom view.
Answer: C
Microsoft認証試験 070-642 070-642 070-642 070-642
NO.9 Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link
connects the main office to a branch office. All computers in the branch office are configured with static IP
addresses. The branch office does not use DHCP and uses a different subnet.
You need to ensure that the portable computers can connect to network resources at the main office and
the branch office.
How should you configure each portable computer?
A. Use a static IPv4 address in the range used at the branch office.
B. Use an alternate configuration that contains a static IP address in the range used at the main office.
C. Use the address that was assigned by the DHCP server as a static IP address.
D. Use an alternate configuration that contains a static IP address in the range used at the branch office.
Answer: D
Microsoft 070-642練習問題 070-642 070-642
NO.10 You have a DHCP server that runs Windows Server 2008 R2. You need to reduce the size of the
DHCP database.
What should you do?
A. From the DHCP snap-in, reconcile the database.
B. From the folder that contains the DHCP database, run jetpack.exe dhcp.mdb temp.mdb.
C. From the properties of the dhcp.mdb file, enable the File is ready for archiving attribute.
D. From the properties of the dhcp.mdb file, enable the Compress contents to save disk space attribute.
Answer: B
Microsoft練習問題 070-642 070-642認証試験
NO.11 Your company is designing its network. The network will use an IPv6 prefix of
2001:DB8:BBCC:0000::/53. You need to identify an IPv6 addressing scheme that will support 2000
subnets.
Which network mask should you use?
A. /61
B. /62
C. /63
D. /64
Answer: D
Microsoft 070-642問題集 070-642 070-642
NO.12 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 is
configured as a DNS server.
You need to ensure that Server1 only resolves queries issued from client computers in the same subnet
as Server1. The solution must ensure that Server1 can resolve Internet host names.
What should you do on Server1?
A. Configure Windows Firewall.
B. Create a conditional forwarder.
C. Modify the routing table.
D. Create a trust anchor.
Answer: A
Microsoft問題集 070-642問題集 070-642認定試験 070-642過去問 070-642過去問
NO.13 Your company has an IPv4 Ethernet network.
A router named R1 connects your segment to the Internet. A router named R2 joins your subnet with a
segment named Private1. The Private1 segment has a network address of 10.128.4.0/26. Your computer
named WKS1 requires access to servers on the Private1 network. The WKS1 computer configuration is
as shown in the following table.
WKS1 is unable to connect to the Private1 network by using the current configuration. You need to add a
persistent route for the Private1 network to the routing table on WKS1.
Which command should you run on WKS1?
A. Route add -p 10.128.4.0/22 10.128.4.1
B. Route add -p 10.128.4.0/26 10.128.64.10
C. Route add -p 10.128.4.0 mask 255.255.255.192 10.128.64.1
D. Route add -p 10.128.64.10 mask 255.255.255.192 10.128.4.0
Answer: B
Microsoft 070-642認定証 070-642認定資格
NO.14 Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected
by a firewall that performs symmetric NAT.
You need to allow peer-to-peer communication between all locations. What should you do?
A. Configure dynamic NAT on the firewall.
B. Configure the firewall to allow the use of Teredo.
C. Configure a link local IPv6 address for the internal interface of the firewall.
D. Configure a global IPv6 address for the external interface of the firewall.
Answer: B
Microsoft過去問 070-642認定資格 070-642練習問題 070-642認定資格
NO.15 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
SNMP Service installed.
You perform an SNMP query against Server1 and discover that the query returns the incorrect
identification information.
You need to change the identification information returned by Server1. What should you do?
A. From the properties of the SNMP Service, modify the Agent settings.
B. From the properties of the SNMP Service, modify the General settings.
C. From the properties of the SNMP Trap Service, modify the Logon settings.
D. From the properties of the SNMP Trap Service, modify the General settings.
Answer: A
Microsoft問題集 070-642問題集 070-642過去問 070-642 070-642問題集
NO.16 You have a DHCP server that runs Windows Server 2008 R2. The DHCP server has two network
connections named LAN1 and LAN2.
You need to prevent the DHCP server from responding to DHCP client requests on LAN2. The server
must continue to respond to non-DHCP client requests on LAN2.
What should you do?
A. From the DHCP snap-in, modify the bindings to associate only LAN1 with the DHCP service.
B. From the DHCP snap-in, create a new multicast scope.
C. From the properties of the LAN1 network connection, set the metric value to 1.
D. From the properties of the LAN2 network connection, set the metric value to 1.
Answer: A
Microsoft 070-642認定試験 070-642参考書
NO.17 Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A
DHCP server is deployed on the network and configured to provide IPv6 prefixes. You need to ensure that
when you monitor network traffic, you see the interface identifiers derived from the Extended Unique
Identifier (EUI)-64 address. Which command should you run?
A. netsh.exe interface ipv6 set global addressmaskreply=disabled
B. netsh.exe interface ipv6 set global dhcpmediasense=enabled
C. netsh.exe interface ipv6 set global randomizeidentifiers=disabled
D. netsh.exe interface ipv6 set privacy state=enabled
Answer: C
Microsoft 070-642 070-642 070-642過去問
NO.18 Your network contains a server that has the SNMP Service installed.
You need to configure the SNMP security settings on the server.
Which tool should you use?
A. Local Security Policy
B. Scw
C. Secedit
D. Services console
Answer: D
Microsoft 070-642 070-642 070-642認定資格 070-642
NO.19 Your network uses IPv4.
You install a server that runs Windows Server 2008 R2 at a branch office. The server is configured with
two network interfaces.
You need to configure routing on the server at the branch office. Which two actions should you perform?
(Each correct answer presents part of the solution. Choose two.)
A. Install the Routing and Remote Access Services role service.
B. Run the netsh ras ip set access ALL command.
C. Run the netsh interface ipv4 enable command.
D. Enable the IPv4 Router Routing and Remote Access option.
Answer: A, D
Microsoft 070-642 070-642 070-642認定証
NO.20 Your company is designing its public network. The network will use an IPv4 range of 131.107.40.0/22.
The network must be configured as shown in the following exhibit.
You need to configure subnets for each segment.
Which network addresses should you assign?
A. Segment A: 131.107.40.0/23
Segment B: 131.107.42.0/24
Segment C: 131.107.43.0/25
Segment D: 131.107.43.128/27
B. Segment A: 131.107.40.0/25
Segment B: 131.107.40.128/26
Segment C: 131.107.43.192/27
Segment D: 131.107.43.224/30
C. Segment A: 131.107.40.0/23
Segment B: 131.107.41.0/24
Segment C: 131.107.41.128/25
Segment D: 131.107.43.0/27
D. Segment A: 131.107.40.128/23
Segment B: 131.107.43.0/24
Segment C: 131.107.44.0/25
Segment D: 131.107.44.128/27
Answer: A
Microsoft 070-642練習問題 070-642認定資格 070-642認証試験
JPexamは最新の000-652問題集と高品質の000-540問題と回答を提供します。JPexamの00M-622 VCEテストエンジンと70-687試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のCUR-009 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论