156-215.70認定試験に関連する参考資料を提供できるサイトが多くあります。しかし、資料の品質が保証されることができません。それと同時に、あなたに試験に失敗すれば全額返金という保障を与えることもできません。普通の参考資料と比べて、JPexamの156-215.70問題集は最も利用に値するツールです。JPexamの指導を元にして、あなたは試験の準備を十分にすることができます。しかも、楽に試験に合格することができます。IT領域でより大きな進歩を望むなら、156-215.70認定試験を受験する必要があります。IT試験に順調に合格することを望むなら、JPexamの156-215.70問題集を使用する必要があります。
あなたはIT職員ですか。今年で一番人気があるIT認証試験に申し込みましたか。もし「はい」と答えてくれたら、あなたはラッキですよ。JPexamのCheckPointの156-215.70トレーニング資料はあなたが１００パーセント試験に合格することを保証しますから。これは絶対に真実なことです。IT業種でより高いレベルに行きたいのなら、JPexamを選ぶのは間違いなく選択です。当社のトレーニング資料はあなたが全てのIT認証試験に合格することを助けます。しかも値段が手頃です。信じないことはしないでください。JPexamを利用したら分かります。
JPexamの助けのもとで君は大量のお金と時間を费やさなくても復楽にCheckPointの156-215.70認定試験に合格のは大丈夫でしょう。ソフトの問題集はJPexamが実際問題によって、テストの問題と解答を分析して出来上がりました。JPexamが提供したCheckPointの156-215.70の問題集は真実の試験に緊密な相似性があります。
多くの人々は高い難度のIT認証試験に合格するのは専門の知識が必要だと思います。それは確かにそうですが、その知識を身につけることは難しくないとといわれています。IT業界ではさらに強くなるために強い専門知識が必要です。
それぞれのIT認証試験を受ける受験生の身近な利益が保障できるために、JPexamは受験生のために特別に作成されたCheckPointの156-215.70試験トレーニング資料を提供します。この資料はJPexamのIT専門家たちに特別に研究されたものです。彼らの成果はあなたが試験に合格することを助けるだけでなく、あなたにもっと美しい明日を与えることもできます。
IT業の多くの人がいくつか認証試験にパスしたくて、それなりの合格証明書が君に最大な上昇空間を与えます。この競争の激しい業界でとんとん拍子に出世させるのはCheckPointの156-215.70認定試験ですが、簡単にパスではありません。でもたくさんの方法があって、最も少ない時間をエネルギーをかかるのは最高です。
試験番号：156-215.70問題集
試験科目：Check Point Certified Security Administrator R70
最近更新時間：2014-01-23
問題と解答：全546問
100％の返金保証。1年間の無料アップデート。
今の多士済々な社会の中で、IT専門人士はとても人気がありますが、競争も大きいです。だからいろいろな方は試験を借って、自分の社会の地位を固めたいです。156-215.70認定試験はCheckPointの中に重要な認証試験の一つですが、JPexamにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってCheckPoint 156-215.70認証試験に参加する方に対して問題集を研究続けています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/156-215.70_exam.html
NO.1 When launching SmartDashboard, what information is required to log into R70?
A.User Name, Management Server IP, certificate fingerprint file
B.User Name, Password, Management Server IP
C.Password, Management Server IP
D.Password, Management Server IP, LDAP Server IP
Answer: B
CheckPoint 156-215.70問題集 156-215.70認証試験
NO.2 You are installing a Security Management Server Your security plan calls for three administrators for this
particular server.How many can you create during installation'?
A.Depends on the license installed on the Security Management Server
B.Only one with full access and one with read-only access
C.One
D.As many as you want
Answer: C
CheckPoint 156-215.70認定試験 156-215.70 156-215.70
NO.3 In a distributed management environment, the administrator has removed the default check from
Accept Control Connections under the Policy > Global Properties > FireWall tab.In order for the Security
Management Server to install a policy to the Firewall, an explicit rule must be created to allow the server
to communicate to the Security Gateway on port_____.
A.256
B.80
C.900
D.259
Answer: A
CheckPoint問題集 156-215.70参考書 156-215.70認定証 156-215.70 156-215.70
NO.4 Which OPSEC server can be used to prevent users from access.ng certain Web sites?
A.LEA
B.AMON
C.UFP
D.CVP
Answer: C
CheckPoint 156-215.70認定試験 156-215.70 156-215.70 156-215.70認定試験 156-215.70
NO.5 You have blocked an IP address via the Block Intruder feature of SmartView Tracker How can you view
the blocked addresses'?
A.Run f wm blockedview.
B.In SmartView Monitor, select the Blocked Intruder option from the query tree view
C.In SmartView Monitor, select Suspicious Activity Rules from the Tools menu and select the relevant
Security Gateway from the list
D.In SmartView Tracker, click the Active tab.and the actively blocked connections displays
Answer: C
CheckPoint認証試験 156-215.70練習問題 156-215.70認定証 156-215.70問題集 156-215.70参考書
NO.6 If you experience unwanted traffic from a specific IP address, how can you stop it most quickly?
A.Check anti-spoofing settings
B.Configure a rule to block the address
C.Create a SAM rule
D.Activate an IPS protection
Answer: C
CheckPoint 156-215.70 156-215.70認定資格 156-215.70
NO.7 You are installing your R70Security Gateway.Which is NOT a valid option for the hardware platform?
A.Crossbeam
B.Solaris
C.Windows
D.IPSO
Answer: B
CheckPoint参考書 156-215.70 156-215.70認定資格 156-215.70 156-215.70過去問 156-215.70過去問
NO.8 Your R70 enterprise Security Management Server is running abnormally on Windows 2003 Server You
decide to try reinstalling the Security Management Server, but you want to try keeping the critical Security
Management Server configuration settings intact (i.e., all Security Policies, databases, SIC, licensing etc )
What is the BEST method to reinstall the Server and keep its critical configuration?
A.1.Create a database revision control backup using the SmartDashboard
2.Create a compressed archive of the *FWDlR*\ conf and FWDiR8\lib directories and copy them to
another networked machine.
3.Uninstall all R70 packages via Add/Remove Programs and reboot.
4.Install again as a primary Security Management Server using the R70 CD.
5.Reboot and restore the two archived directories over the top of the new installation, choosing to
overwrite existing files.
B.1.Download the latest upgrade_export utility and run it from a c; \temp directory to export the
configuration into a .tgz file
2.Skip any upgarde__verification warnings since you are not upgrading
3.Transfer the .tgz file to another networked machine
4.Download and run the cpclean utility and reboot
5.Use the R70 CD-ROM to select the uuarade import ootion to import the confiauration
C.1.Download the latest upqrade_expoct utility and run it from a \temp directory to export the
configuration into a .tgz file
2.Perform any requested upgcade_veri¡êic tion sugested steps
3.Uninstall all R70 packages via Add/Remove Programs and reboot
4.Use SmartUpdate to reinstall the Security Management Server and reboot
5.Transfer the tgz file back to the local \temp
6.Run upgrade__import to import the configuration
D.1.Insert the F70 CD-ROM, and select the option to export the configuration using the latest upgrade
utilities
2.Perform any requested upgrade_verification suggested steps and re-export the configuration if needed
3.Save the export " tgz file to a local c: \temp directory
4.Uninstall all R70 packages via Add/Remove Programs and reboot
5.Install again using the R70 CD-ROM as a primary Security Management Server and reboot
6.Run upgrade_import to import the configuration
Answer: C
CheckPoint 156-215.70問題集 156-215.70問題集 156-215.70認定試験
NO.9 You just installed a new Web server in the DMZ that must be reachable from the Internet You create a
manual Static NAT rule as follows:
Source: Any
Destination: web_public_IP
Service: Any
Translated Source: original
Translated Destination: web_private_IP
Service: original
web_publicIP" is the node Object that represents the public IP address of the new Web
server."web_privateIP" is the node object that represents the new Web site's private P address You
enable all settings from Global Properties > NAT.
When you try to browse the Web server from the Internet, you see the error 'page cannot be displayed"
Which of the following is NOT a possible reason?
A.There is no route defined on the Security Gateway for the public IP address to the private IP address of
the Web server.
B.There is no Security Policy defined that allows HTTP traffic to the protected Web server.
C.There is an ARP entry on the Gateway but the settings Merge Manual proxy ARP and Automatic ARP
configuration are enabled in Global Properties.The Security Gateway ignores manual ARP entries.
D.There is no ARP table entry for the public IP address of the protected Web server
Answer: A
CheckPoint 156-215.70 156-215.70練習問題
NO.10 A digital signature:
A.Provides a secure key exchange mechanism over the Internet
B.Automatically exchanges shared keys
C.Guarantees the authenticity and integrity of a message
D.Decrypts data to its original form.
Answer: A
CheckPoint 156-215.70認定証 156-215.70過去問
NO.11 You are evaluating the configuration of a mesh VPN Community used to create a site-to-site VPN.This
graphic displays the VPN properties in this mesh Community
Which of the following would be a valid conclusion?
A.The VPN Community will perform IKE Phase 1 key-exchange encryption using the longest key Security
Gateway R70 supports.
B.Changing the setting Perform IPsec data encryption with from AES-128 to 3DES will increase the
encryption overhead.
C.Changing the setting Perform key exchange encryption with 3DES to DES will enhance the VPN
Community's security, and reduce encryption overhead.
D.Change the data-integrity settings for this VPN CommunitybecauseMD5 is incompatible with AES.
Answer: B
CheckPoint過去問 156-215.70 156-215.70 156-215.70認定証
NO.12 What is a Consolidation Policy?
A.The collective name of the Security Policy, Address Translation, and IPS Policies.
B.The specific Policy written in SmartDashboard to configure which log data is stored in the
SmartReporter database.
C.The collective name of the logs generated by SmartReporter.
D.A global Policy used to share a common enforcement policy for multiple Security Gateways.
Answer: B
CheckPoint 156-215.70過去問 156-215.70認定証 156-215.70 156-215.70
NO.13 Your company's Security Policy forces users to authenticate to the Gateway explicitly, before they can
use any services.The Gateway does not allow the Telnet service to itself from any location.How would you
configure authentication on the Gateway? With a:
A.Client Authentication for fully automatic sign on
B.Client Authentication rule using the manual sign-on method, using HTTP on port 900
C.Client Authentication rule, using partially automatic sign on
D.Session Authentication rule
Answer: B
CheckPoint 156-215.70過去問 156-215.70認定試験
NO.14 What CANNOT be configured for existing connections during a policy install?
A.Keep all connections
B.Keep data connections
C.Reset all connections
D.Re-match connections
Answer: C
CheckPoint認証試験 156-215.70 156-215.70
NO.15 John is the Security Administrator in his company He installs a new R70 Security Management Server
and a new R70 Gateway He now wants to establish SIC between them.After entering the activation key,
the message "Trust established" is displayed in SmartDashboard, but SIC still does not seem to work
because the policy won't install and interface fetching still does not work.What might be a reason for this?
A.This must be a human error.
B.The Gateway's time is several days or weeks in the future and the SIC certificate is not yet valid.
C.SIC does not function over the network.
D.It always works when the trust is established.
Answer: B
CheckPoint認定資格 156-215.70認定資格 156-215.70 156-215.70 156-215.70
NO.16 Which of the following are authentication methods that Security Gateway R70 uses to validate
connection attempts? Select the response below includes that includes the MOST complete list of valid
authentication methods:
A.Proxied, User, Dynamic, Session
B.Connection, User, Client
C.User, Client.Session
D.Connection, Proxied, Session
Answer: C
CheckPoint過去問 156-215.70 156-215.70問題集 156-215.70
NO.17 A Security Policy installed by another Security Administrator has blocked all SmartDashboard
connections to the stand-alone installation of R70.After running the fw unloadlocal command, you are
able to reconnect with SmartDashboard and view all changes.Which of the following change is the most
likely cause of the block?
A.A Stealth Rule has been configured for the R70 Gateway.
B.The Allow control connections setting in Policy > Global Properties has been unchecked.
C.The Security Policy installed to the Gateway had no rules in it
D.The Gateway Object representing your Gateway was configured as an Externally Managed VPN
Gateway.
Answer: B
CheckPoint過去問 156-215.70 156-215.70 156-215.70
NO.18 Which rule is responsible for the installation failure?
A.Rule 4
B.Rule 3
C.Rule 5
D.Rule 6
Answer: A
CheckPoint 156-215.70 156-215.70認証試験 156-215.70問題集 156-215.70
NO.19 Which of the following SSL Network Extender server-side prerequisites is NOT correct?
A.The Gateway must be configured to work with Visitor Mode.
B.There are distinctly separate access rules required for SecureClient users vs.SSL Network Extender
users.
C.To use Integrity Clientless Security (ICS), you must install the IC3 server or configuration tool.
D.The specific Security Gateway must be configured as a member of the Remote Access Community
Answer: B
CheckPoint 156-215.70 156-215.70問題集
NO.20 In previous version, the full TCP three-way handshake was sent to the firewall kernel for inspection.How
is this improved in current Flows/SecureXL?
A.Only the initial SYN packet is inspected The rest are handled by IPSO
B.Packets are offloaded to a third-party hardware card for near-line inspection
C.Packets are virtualized to a RAM drive-based FW VM
D.Resources are proactively assigned using predictive algorithmic techniques
Answer: A
CheckPoint認定証 156-215.70 156-215.70認証試験
NO.21 Which opponent functions as the Internet Certificate Authority for R70?
A.Security Gateway
B.Management Server
C.Policy Server
D.SmartLSM
Answer: B
CheckPoint 156-215.70 156-215.70参考書 156-215.70 156-215.70認定資格 156-215.70
NO.22 Assume an intruder has compromised your current IKE Phase 1 and Phase 2 keys.Which of the
following options will end the intruder s access after the next Phase 2 exchange occurs?
A.Perfect Forward Secrecy
B.SHA1 Hash Completion
C.Phase 3 Key Revocation
D.M05 Hash Completion
Answer: A
CheckPoint 156-215.70認証試験 156-215.70 156-215.70過去問 156-215.70認定試験
NO.23 You are trying to save a custom log query in R70 SmartView Tracker, but getting the following error
"Could not save 'query-name' (Error Database is Read Only).
Which of the following is a likely explanation for this?
A.You have read-only rights to the Security Management Server catabase.
B.You do not have the explicit right to save a custom query in your administrator permission profile under
SmartConsole customization
C.You do not have OS write permissions on the local SmartView Tracker PC in order to save the custom
query locally
D.Another administrator is currently connected to the Security Management Server with read/write
permissions which impacts your ability to save custom log queries to the Security Management Server.
Answer: A
CheckPoint 156-215.70認証試験 156-215.70 156-215.70
NO.24 Which of following uses the same key to decrypt as it does encrypt?
A.Asymmetric encryption
B.Symmetric encryption
C.Certificate-based encryption
D.Dynamic encryption
Answer: B
CheckPoint認定試験 156-215.70 156-215.70 156-215.70練習問題 156-215.70認定資格
NO.25 What are you required to do before running upgrade__ export?
A.Run cpconfig and set yourself up as a GUI client.
B.Run a cpstop on the Security Management Server
C.Run a cpstop on the Security Gateway.
D.Close all GUI clients
Answer: B,C,D
CheckPoint練習問題 156-215.70 156-215.70 156-215.70練習問題 156-215.70
NO.26 External commands can be included in SmartView Tracker via the menu Tools > Custom
Commands.The Security Management Server is running under SecurePlatform, and the GUI is on a
system running Microsoft Windows.How do you run the command, traceroute on an IP address?
A.Use the program GUIdbedit to add the command traceroute to the properties of the Security
Management Server.
B.Go to the menu Tools > Custom Commands and configure the Windows command tracert.exe to the list
C.There is no possibility to expand the three pre-defined options ping, whois, and Nslookup
D.Go to the menu.Tools > Custom Commands and configure the Linux command traceroute to the list
Answer: B
CheckPoint参考書 156-215.70 156-215.70 156-215.70過去問
NO.27 Which of the following are available SmartConsole clients which can be installed from the R70
Windows CD? Read all answers and select the most complete and valid list.
A.SmartView Tracker, CPINFO, SmartUpdate
B.SmartView Tracker, SmartDashboard, SmartLSM, SmartView Monitor
C.SmartView Tracker, SmartDashboard, CPINFO, SmartUpdate.SmartView Status
D.Security Policy Editor, Log Viewer, Real Time Monitor GUI
Answer: B
CheckPoint 156-215.70 156-215.70 156-215.70認定資格 156-215.70
NO.28 Using the output below, what type of VPN Community is configured for fw-stlouis?
A.Meshed
B.Domain-Based
C.Star
D.Traditional
Answer: A
CheckPoint 156-215.70練習問題 156-215.70練習問題 156-215.70認証試験 156-215.70
NO.29 Which statement defines Public Key Infrastructure? Security is provided
A.by authentication.
B.by Certificate Authorities, digital certificates, and two-way symmetric-key encryption.
C.by Certificate Authorities, digital certificates, and public key encryption.
D.via both private and public keys, without the use of digital Certificates.
Answer: C
CheckPoint 156-215.70 156-215.70 156-215.70過去問
NO.30 Which command displays the installed Security Gateway version?
A.fw stat
B.cpstat -gw
C.fw ver
D.tw printver
Answer: C
CheckPoint参考書 156-215.70 156-215.70 156-215.70
JPexamは最新のVCAD510問題集と高品質の600-199問題と回答を提供します。JPexamの000-540 VCEテストエンジンと100-101試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の70-331 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论